🛟 Help Center

Yunoc is slow, latency is high or some sites will not load?

Compare the local network, destination and selected line, then check the routing mode. Changing modes does not change the exit region; no speed cap does not guarantee fixed bandwidth.

Last updated · All help topics

Yunoc: Android / Windows / macOS

How does local routing differ from selecting a line?

Global, PAC and Return modes decide where this device's IPv4 traffic goes, while the line you select decides the exit; Return mode does not change the line's exit region.

  1. Global, PAC and Return modes in Yunoc control IPv4 routing on this device. Selecting a line determines the exit. Return mode does not change the line’s exit region.
  2. Local settings apply only to this device and system user. Saving relevant settings while connected rebuilds the current line; this does not promise complete IPv6 split routing.
  3. For iOS, Cisco, OpenConnect or older AnyLink clients, follow the matching guide. Older website rules should not be treated as Yunoc local-routing settings.
All clients

How do I troubleshoot slow access, high latency or sites that will not load?

First work out whether the local network, the specific site or the current line is the cause, then check the routing mode or try another line and recheck; no speed cap does not mean fixed bandwidth.

  1. Check the local network and specific destination, then compare the selected line’s actual behavior. No speed cap does not guarantee fixed bandwidth or equal speed for every site.
  2. Check routing according to the client guide. If changing a line or mode, verify the reconnected state; a mode change is not an exit-region change.
  3. If it persists, provide a redacted destination domain, time, line name and error in a ticket.

Other help topics

Still stuck? Open a ticket in your account. Setup steps are in the setup guide; pre-sales questions are in the FAQ.